Siqura FD820M1IR, Руководство по установке

Страница: 37 / 39

Note: Adjust the lens carefully within the limits mentioned above, or the cables
underneath may be harmed.
11 Attach the snap-on camera module to the dome camera’s housing/plate. Install the
camera module with the terminal blocks facing the side cable entry.
12 Tighten the module-fastening screw.
13 Replace the back of the dome cover.
Align the arrow mark on the dome cover with the one on the housing as shown in the
figure below.
14 Screw on the two Torx screws on the side of the dome cover tightly to fasten the dome
cover.
Install the camera
37