Siqura FD820M1IR, Руководство по установке

Страница: 20 / 39

10 Attach the snap-on camera module into the dome camera’s housing, and tighten the
module-fastened screw with the screw driver to secure the camera module.
The terminal blocks should face the side conduit entry for the FD820 camera, as shown
above.
11 Connect the power and network outputs. Refer to Connectors for details regarding the
camera connector definition.
The power cable is omitted if using PoE.
12 Access the camera browser-viewer for viewing images. Refer to the FD820's user
manual for further details. Users can also use the camera’s BNC connector for video
output.
13 Position the FD820's motorised lens and adjust the its zoom level and focal length via
the web page.
14 Adjust the camera’s pan/tilt holder to a desired angle, as shown below.
Install the camera
20