Siqura C-60 E-MC, Руководство пользователя

Страница: 22 / 142

Siqura C-60 E-MC
Page 16
Step 1: Setting the host PC to the factory default subnet of the unit

To configure the network adapter on the host PC
1. In the Control Panel, open Network Connections .
2. Right-click the connection to be configured, and select Properties .
3. In the items list, select
Internet Protocol (TCP/IP)
.
4. Click Properties .
5. In the Internet Protocol (TCP/IP) Properties dialog, click
Use the following IP address
.
6. Enter an IP address that will assign your PC to the same subnet as the unit (i.e., within the
10.x.x.x range). Use 255.0.0.0 as a subnet mask.
Important:
To prevent conflicts, be sure to choose a unique IP address. No two devices on a
network can have the same IP address.
7. To apply the new settings, click
OK
, and then click
Close
.
Opening IP settings on the host PC Changing host PC IP settings to the factory-default
settings of the unit
At this point, connect your PC to the C-60 E-MC. You can connect them directly using a crossover
cable, or connect both to a switch.
Step 2: Accessing the unit
Using a standard web browser you can now log on to the C-60 E-MC's internal web server.
Step 3: Changing the unit's network settings
The Network web page enables you to make the unit's network addressing compatible with the
network it will be hooked into. You can set a fixed IP address or have the IP address assigned by
a DHCP server. In the latter case, open the Advanced Settings and enable DHCP. Do not forget
to save and reboot the unit after changing the settings.