Siqura C-60 E-MC, Руководство пользователя

Страница: 112 / 142

Siqura C-60 E-MC
Page 106
Input # Settings
Contact Closure Input 1 Settings
Input # Settings
Operational mode
Normal Direction.
Invert
Force active Always on (e.g. for testing purposes).
Force inactive Always off.
10.8.1 Making Contact Closure Connections
Making CC links is similar to making video/data/audio links, but without additional interface
configuration.

To make a contact closure connection

On the Transmitter side, fill in a destination IP address and port number for each codec you
want a CC stream to go to, and then enable the stream.

On the other side of the link (i.e. the codec you want to receive the CC stream), fill in the
source IP address, the local port number (the same as specified for the transmitter), and
then enable the receiver.
Note:
Clearing an Enable check box disables the transmission or reception of the stream, not the
contact input or output itself. If the stream is disabled, the contact can still be controlled and
read using MX software or the HTTP API.
10.8.2 Advanced Settings
CC # Settings, Transmitter #
Advanced Settings, CC 1, Transmitter 1
Transmitter #
Connection priority Parameter intended for use with MX Software Development Kit (MX SDK).
Multicast TTL Range: [0...127]. Specify the number of routers (hops) that multicast traffic is
permitted to pass through before expiring on the network.
Link loss alarm timeout Range: [1...1000] s. Default: 10 s. Time in seconds before alarm sent.