Siqura C-60 E-MC, Руководство пользователя

Страница: 129 / 142

Working with the Web Pages
Page 123
10.13 Date and Time
Date and Time settings
Date and Time
The C-60 E-MC has a battery-supported real-time clock that can be adjusted either manually (as
shown above), or automatically with the aid of an SNTP (Simple Network Time Protocol) server.
After entering changes, press Save to make them permanent.
The date and/or time are displayed on screen if enabled on the OSD tab of the Video page. The
on-screen position and color of the text are governed by the relevant OSD settings.
The C-60 E-MC adds 1 hour to the local time when Daylight Savings Time is enabled. The unit
does
not automatically change between summer and winter time. The user has to set the proper
state in the Date and Time section of the web page (or use an MX/IP commmand).
SNTP Settings
If enabled, the SNTP server is queried automatically by the internal clocks, with a configurable
time interval.

To set up the C-60 E-MC for use with an SNTP server
1. In the SNTP Settings section, clear the Enable time service check box, and then click Save .
2. On the Time zone list, select your local zone.
3. Select
Enable Daylight Savings Time
, if required.
4. Click Save , and then wait for 2 seconds.
5. Set the
Date
and
Local time
values.
A maximum error of 5 minutes is allowed for these settings.
6. Click
Save
.
7. In the SNTP Settings section, select the Enable time service check box, and then click Save .
The unit will now synchronize (within the interval set in the SNTP Settings section) to the
time server and remain synchronized, also after reboots.