Sioux Tools IW38TAP-2Q, Инструкция-перечень запасных частей

Страница: 2 / 18

2
*Sound Pressure *Sound Power *Vibration
Catalog No. dBA dBA m/s
2
IW38TAP-2Q 86.8 98.4 12.0
IW38TAP-3P 86.8 98.4 12.0
*per PN8NTC1 *per PN8NTC1 *per ISO 8662
SOUND AND VIBRATION READINGS
CHANGING THE POSITION OF THE REVERSING VALVE LEVER
The rotation symbols appear on both sides of the tool because the reversing valve lever can be moved from one side of the tool to the other
so it can be operated with either hand.
To change the position of the reversing valve:
• Remove the roll pin from the trigger. Be sure to support the trigger while driving out the pin to prevent bending the throttle valve.
• Note the setting of the control valve knob.
• Remove the setscrew from the control valve knob.
• Remove the control valve knob.
• Note what direction the reverse valve lever is set for.
• Remove the setscrew from the reverse valve lever.
• Remove the reverse valve lever.
• Reinstall the reverse valve lever on the opposite side of the tool. Be sure it is set for the same rotation as it was on the other side.
• Reinstall the setscrew in the reverse valve lever. Make sure the setscrew engages the hole in the reverse valve.
• Reinstall the control valve knob. Make sure it is at the same setting was in originally.
• Reinstall the setscrew in the control valve knob. Make sure the setscrew engages the hole in the control valve.
• Reinstall the trigger. Be sure to support the trigger while driving in the pin to prevent bending the throttle valve.
CONTROLLING OUTPUT
The output of the tool is controlled with the Control Valve Knob located behind the trigger.
Set the knob to 1 for minimum output and to 4 for maximum output.
DECLARATION OF CONFORMITY
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
IW38TAP-2Q, IW38TAP-3P
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
EN 792, EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
Signature of issuer
July 1, 2003
Murphy, North Carolina, USA
Date and place of issues
Gerald E. Seebeck
President
Sioux Tools Inc.
Name and position of issuer