Sioux Automation Center TURBO-MAX 6141, Руководство оператора и каталог запасных частей

Страница: 2 / 48

Page 2
Never overload wagon. Follow rating of gear or rating of tires, whichever is less.
Ensure that anybody present is clear before applying power to any machinery used in conjunc-
tion with wagon box or when moving box.
Never allow anyone in, near, or on mixing chamber during mixing, transporting, or unloading
of feed.
Do not exceed 20 miles per hour when towing wagon.
GENERAL INFORMATION
1. Unless otherwise specifi ed, high-strength (grade5) (3
radial-line head markings) hex head bolts are used
throughout assembly of this piece of equipment.
2. Whenever terms
“LEFT”
and
“RIGHT”
are used in this
manual it means from a position behind the wagon box
and facing forward.
3. When placing a parts order, refer to this manual for
proper part numbers and place order by PART NO. and
DESCRIPTION.
4. Read assembly instructions carefully. Study
assembly procedures and all illustrations before you begin
assembly. Note which parts are used in each step. This
unit must be assembled in proper sequence or complica-
tions will result.
WARNING:
TO AVOID PERSONAL INJURY OR DEATH, OBSERVE FOLLOWING
INSTRUCTIONS:
T h a n k y o u f o r p u r c h a s i n g a S i o u x A u t o m a t i o n Tu r b o - M a x 6 1 0 0 s e r i e s r e e l m i x e r. We f e e l y o u h a v e
made a wise choice and hope you are completely satisfied with your new piece of equipment. Your new 6100
series Turbo-Max is a durable, effi cient, and easy to use unit. Proper care and use will result in many years of service.
INTRODUCTION
Table of Contents
General Information ................................................................................................................................................ 2
Model and Serial Number Identifi cation...................................................................................................................3
Safety, Signal Words ............................................................................................................................................... 4
Equipment Safety Guidelines .................................................................................................................................. 5
Lighting and Marking ............................................................................................................................................... 5
Safety Sign Care ..................................................................................................................................................... 5
Tire Safety ............................................................................................................................................................... 6
Before Operation ..................................................................................................................................................... 6
During Operation ....................................................................................................................................................7-8
Following Operation ................................................................................................................................................ 8
Highway and Transport Operations .......................................................................................................................8-9
Performing Maintenance ........................................................................................................................................ 10
Bolt Torque ............................................................................................................................................................. 11
PTO Horsepower Requirements ............................................................................................................................ 12
Drawbar Attaching System ..................................................................................................................................... 12
Hydraulic System ................................................................................................................................................... 12
Mixer Setup ............................................................................................................................................................ 12
Mixer Operation ...................................................................................................................................................13-15
Inspection and Adjustment ...................................................................................................................................15-16
Electronic Scales ................................................................................................................................................... 16
Lubrication ............................................................................................................................................................. 17
Decal Location ....................................................................................................................................................... 18
Model Specifi cations .............................................................................................................................................. 19
BoxBase Assembly ..............................................................................................................................................20-23
Reel Assembly .................................................................................................................................................... 24
Wiper Tube Assembly .......................................................................................................................................... 25
Bearing Assembly ................................................................................................................................................ 26
Auger Assemblies ................................................................................................................................................ 27
Trailer Base Assembly .........................................................................................................................................28-29
Subframe Assembly ............................................................................................................................................... 30
Hub & Spindle Assemblies .................................................................................................................................... 31
Final Assembly ....................................................................................................................................................... 32
Slide Tray Breakdown ............................................................................................................................................ 33
Power Discharge Breakdown ..............................................................................................................................34-35
Hydraulics Breakdown .........................................................................................................................................36-40
Control Box Breakdown ........................................................................................................................................ 41
1000 PTO Conversion Kit ...................................................................................................................................... 42
Driveline Assembly ..............................................................................................................................................43-44
Lighting Breakdown ............................................................................................................................................... 45
Warranty ...............................................................................................................................................................46-47