Sioux Automation Center TURBO-MAX 6141, Руководство оператора и каталог запасных частей

Страница: 10 / 48

Page 10
Good maintenance is your responsibility. Poor maintenance is an invitation for trouble.
Make sure there is plenty of ventilation. Never operate engine in a closed building. Exhaust fumes may
cause asphyxiation.
Before working on this machine, stop towing vehicle, set brakes, shut off engine and remove ignition
key .
Always use safety support and block wheels. Never use a jack to support machine.
Always use proper tools or equipment for job at hand.
Use extreme caution when making adjustments.
Follow torque chart in this manual when tightening bolts and nuts.
Never use your hands to locate a hydraulic leak on attachments. Use a small piece of cardboard or wood.
Hydraulic fl uid escaping under pressure can penetrate skin.
Openings in skin and minor cuts are susceptible to infection from hydraulic fl uid. Without immediate
medical treatment, serious infection and reactions can occur.
When disconnecting hydraulic lines, shut off hydraulic supply and relieve all hydraulic pressure.
Replace all shields and guards after servicing and before moving equipment.
After servicing, be sure all tools, parts, and service equipment are removed.
Do not allow grease or oil to build up on any step or platform.
When replacing bolts, refer to owner’s manual.
Refer to bolt torque chart for head identifi cation marking.
Where replacement parts are necessary for periodic maintenance and servicing, genuine factory
replacement parts must be used to restore your equipment to original specifi cations. Manufacturer will
not claim responsibility for use of unapproved parts or accessories and other damages as a result of their
use.
If equipment has been altered in any way from original design, manufacturer does not accept any liability
for injury or warranty.
A fi re extinguisher and fi rst aid kit should be kept readily accessible while performing maintenance on this
equipment.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PERFORMING MAINTENANCE