F M
20
1. Power
2. Mic sockets
3. USB port
4. Remote control sensor
5. Display screen
6. Disc door
7. Previous/Next
8. Play/Enter
9. Stop
10./-
11. Eject
1
PANELS
TROUBLESHOOTING
2
7
8 9
10
11
14
16 17 18
19
20
21
12. Video output
13. Optical fiber output
14. Coaxial output
15. L/R audio output
16. FM antenna interface
17. 5.1channel output
18. L/R audio input
19. 5.1CH speakers output
20. Power on/off
21. Power supply input
For your convenience, we have listed some methods to solve common problems you may
encounter whilst you are using the system. If the problem occurs repeatedly, contact the nearest
maintenance centre.
Operation incorrect
Possible cause
Solution
Power supply does
not work
Power socket is not fully
inserted into the power socket
Fully inset the power plug
into the power socket
Remote control does
not work
The batteries are flat
Replace the old batteries with
new ones
The remote control is not
aiming at the remote control
sensor
Please aim the remote control
correctly; in line with the
remote sensor
No image on the TV
screen
The system is not connected
correctly
Reconnect the system by
referring to the illustration
TV not set in video mode
Set the TV in video mode
The scanning mode does not
match to the TV scanning
mode
Reset the scanning mode
Play is unavailable
No disc inserted
Insert a disc
Disc incorrectly inserted
Reinsert the disc with picture
facing upwards
Disc is not compatible with
the device
No sound from
speakers
Audio wire is not connected
correctly
Connect the audio wire
correctly
Incorrectly connected to
amplifier
Connect the amplifier correctly
by referring to the illustration
Discontinuous sound
or distorted pictures
Disc is not clean
Disc scratched
Disc distorted
Replace with a clean disc or
use a soft cloth to clean the
disc before inserting it again
Replace with a new one
Invalid display on the
screen
Please refer to the user manual
Only use disc that are
compatible with this device
Problem
FRONT
BACK
5
4
6
15
13
3
12
