THERMAL RECEIPT PRINTER
7
n = 3: Error status
Bit Off/On Hex
Decimal Function
0
0
00
0
Not used.Fixed to Off.
1
1
02
2
Not used.Fixed to On.
2
- - - Undefined.
3
0 00 0 No
auto-cutter
error.
1 08 8 Auto-cutter error occurs.
4
1
10
16
Not used.Fixed to On.
5
0 00 0 No
unrecoverable
error.
1 20 32 Unrecoverable
error
occurs.
6
0 00 0 No
auto-recoverable error.
1 40 64 Auto
recoverable error occurs.
7
0
00
0
Not used.Fixed to Off.
n = 4: Continuous paper sensor status
Bit Off/On Hex
Decimal Function
0
0
00
0
Not used.Fixed to Off.
1
1
02
2
Not used Fixed to On.
2,3 0
00
0
Paper roll near-end sensor:paper adequate.
1
0C
12
Paper near-end is detected by the paper roll near-end
sensor.
4
1
10
16
Not used.Fixed to On.
5,6
0 00 0 Paper
roll
sensor:Paper
present.
1
60
96
Paper roll end detected by paper roll senso.
7
0
00
0
Not used.Fixed to Off.
[Reference]
DLE ENQ, GS a, GS r
DLE ENQ
n
[Name] Real-time request to printer
[Format] ASCII DLE ENQ n
Hex 10 05 n
Decimal 16 5 n
[Range] 1 <=
n <=
2
[Description] Responds to a request from the host computer. n specifies the requests as
follows:
n Request
1 Recover from an error and restart printing from the line where the error occurred
2 Recover from an error aft clearing the receive and print buffers
[Details]
This command is effective only when an auto-cutter error occurs.
The printer starts processing data upon receiving this command.
This command is executed even when the printer is off-line, the receive buffer
is full, or there is an error status with a serial interface model.
With a parallel interface model, this command can not be executed when the
printer is busy. This command is executed even when the printer is off-line or