Sinocan P11-USL Скачать руководство пользователя страница 20

Страница: 20 / 52

THERMAL RECEIPT PRINTER

Decimal 27 74

[Range]

≤

255

[Description] Prints the data in the print buffer and feeds the paper [

╳

vertical or horizontal

motion unit] inches.

[Details] • After printing is completed, this command sets the print starting position to the

beginning of the line.

• The paper feed amount set by this command does not affect the values set by

ESC 2

ESC 3

• The horizontal and vertical motion unit are specified by

GS P

• The

GS P

command can change the vertical (and horizontal) motion unit.

However, the value cannot be less than the minimum vertical movement
amount, and it must be in even units of the minimum vertical movement
amount.

• In standard mode, the printer uses the vertical motion unit ( y).
• In page mode, this command functions as follows, depending on the starting

position of the printable area:

①

When the starting position is set to the upper left or lower right of the

printable area using

ESC T

, the vertical motion unit (y) is used.

②

When the starting position is set to the upper right or lower left of the print

able area using

ESC T

, the horizontal motion unit ( x) is used.

• The maximum line spacing is 1016mm (40 inches). When the setting value

exceeds the maximum, it is converted to the maximum automatically.

[Reference]

GS P

ESC L

[Name] Select page mode
[Format] ASCII ESC L

Hex 1B 4C
Decimal 27 76

[Description] Switches from standard mode to page mode.
[Details] • This command is enabled only when processed at the beginning of a line in

standard mode.

• This command has no effect in page mode.
• After printing by

is completed or by using

ESC S

, the printer returns to

standard mode.

•



This command sets the position where data is buffered to the position specified

ESC T

within the printing area defined by

ESC W

• This command switches the settings for the following commands (in which the

values can be set independently in standard mode and page mode) to those for
page mode:

①

Set right-side character spacing:

ESC SP, FS S

②

Select default line spacing:

ESC 2, ESC 3

• Only valve settings is possible for the following commands in page mode; these

commands are not executed.

①



Turn 90°clockwise rotation mode on/off:

ESC V

②



Select justification:

ESC a

③



Turn upside-down printing mode on/off:

ESC {

④



Set left margin:

GS L

Содержание P11-USL





















































Результаты поиска

Содержание P11-USL

Отзывы:

Sinocan P11-USL, Руководство по программированию, Страница: 20 / 52

Результаты поиска

Содержание P11-USL

Отзывы: