Sinocan P11-USL, Руководство по программированию, Страница: 30 / 52

THERMAL RECEIPT PRINTER 30
[Default] n = 0
[Example]
FS p n m
[Name] Print NV bit image
[Format] ASCII FS p
n m
Hex 1C 70 n m
Decimal 28 112 n m
[Range] 0 <=  n <=  255
0 <=  m <=  3 , 48 <=  m <=  51
[Description] Prints a NV bit image n using the mode specified by m .
m
Mode Vertical Dot Density Horizontal Dot Density
0, 48 Normal 200 dpi 200 dpi
1, 49 Double-width 200 dpi 100 dpi
2, 50 Double-height 100 dpi 200 dpi
3, 51 Quadruple 100 dpi 100 dpi
[dpi: dots per 25.4 mm {1"}]
 n is the number of the NV bit image (defined using the
FS q
command).
 m specifies the bit image mode.
[Details]  NV bit image means a bit image which is defined in a non-volatile memory by
FS q
and printed by
FS p
.
 This command is not effective when the specified NV bit image has not been defined.
 In standard mode, this command is effective only when there is no data in the print buffer.
 In page mode, this command is not effective.
 This command is not affected by print modes (emphasized, double-strike, underline,character size,
white/black reverse printing, or 90
 rotated characters, etc.), except upside-down printing mode.
 If the printing area width set by
GS L
and
GS W
for the NV bit image is less than one vertical
line, the following processing is performed only on the line in question. However, in NV bit
image mode, one vertical line means 1 dot in normal mode (
m 0, 48) and in double-height mode
( m 2, 50), and it means 2 dots in double-width mode ( m 1, 49) and in quadruple mode( m 3,
51).
① The printing area width is extended to the right in NV bit image mode up to one line vertically.
In this case, printing does not exceed the printable area.