Sinoboom GTJZ0407SE, Руководство по эксплуатации

Страница: 15 / 36


Make sure that lateral guardrail is installed and bolts are screwed tightly.
Check hydraulic oil level
Keeping appropriate hydraulic oil level is essential for the machine. Inappropriate hydraulic oil
level will cause damage to hydraulic components. Inspectors can monitor change of hydraulic oil
level through routine inspections and this kind of change may indicate problems with hydraulic
system.
Follow procedure below when machine is stowed.
1. Check oil level gauge on the side of hydraulic oil tank with your eyes.
Results: The hydraulic oil level should be under ‘Full’ mark on the gauge.
2. Fill in oil as needed. Do NOT overfill.
Hydraulic oil type

Room temperature area
（
-10
℃～
40
℃）：
L-HM46
；

Cold area
（
-30
℃～
-10
℃） ：
L-HV32
；

High temperature area
（＞
40
℃） ：
L-HM68
；

Extremely Cold area
（＜
-30
℃）：
Need specific scheme
；

To add different hydraulic oil to the factory according to the customer’s request.
Check battery
Battery condition is critical to engine performance and safe operation. Inappropriate electrolyte
liquid level and damaged cables and wiring can result in damage of engine components and then
hazardous situations.
Risk of electric shock Contact with live circuit could result in death or
serious body injury. Take off all rings, watches and personal adornments.
Risk of body injury Battery contains acid. Prevent acid in battery from
spilling over and keep away from the acid. Use soda water to neutralize
acid spilt over.
Carry out the following procedures after the battery is fully charged.
1
、
Wear protective clothing and goggles.
2
、
Be sure that the battery cable connections are free of corrosion.
3
、
Be sure that the battery hold-down and cable connections are tightly connected.
Terminal protectors and anti-corrosion sealant will help eliminating
corrosion to battery terminals and cable.
14