background image

                                                                                                        Page 5 of 12

 

 

 

READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER’S 

IRONING INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS 

SIMILIAR TO THE FOLLOWING. 

 

 

 

 

 

 

 

 

 

 

 

HINT FOR IRONING 

1.

 

Sort out the articles to be ironed according to the type of fabric. This will 

minimize the frequency of temperature adjustment for different garment. 

2.

 

Test ironing a small area on the backside or inside the garment if you are unsure 

about the type of fabric. Start with a low temperature and increase gradually. 

3.

 

Wait for 2 minutes before ironing heat sensitive fabrics. Temperature adjustment 

needs certain time to reach the required level no matter it is higher or lower. 

4.

 

Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing 

cloth to prevent shine marks 

 

OPERATING INFORMATION 

The appliance has a high technology steam chamber, water is converted to steam 

vapor in the chamber and transported to the iron unit through the supply cord.  

 

 

 

 

 

 

 

 

 

 

 

 

Temperature Control Setting 

 

Acetate 

. Elastane 

. Polyamide 

. Polypropylene 

 

Polyester 

Silk 

Triacetate 

Viscose 

. Cotton 

. Linen 

 

Содержание SISS2280













Отзывы: