Page 7 of 12
Note:
1.
The steam never come out until the steam station reached the required
temperature
2.
It takes about one minutes to reach its required temperature.
STEAM IRONING
1.
Unwind and straighten the power cord and supply cord.
2.
Fill the water tank with tap water. (See HOW TO FILL WATER)
3.
Connect the appliance to a suitable mains supply outlet.
4.
“Beep” sound would be heard and the LCD would display all logos for
a Second then turn off.
5.
Press the power On/Off button,
6.
The medium steam level ( ) and hard water level indicator will display in the
LCD with a beep sound.
7.
The will blink to indicate; the steam station is heating up or cooling down
for the steam ironing.
8.
Turn the Temperature Dial in clockwise direction; select ‘
●
’ (1 dot), ‘
●●
’ (2 dots)
or ‘
●●●
’ (3 dots) according to the recommendation of garment label.
9.
Pilot Light glow until the required temperature for the iron unit is reached.
10.
Select your required steam level by press the “+, -” LCD control buttons, Max
steam level ( ), medium steam level ( ) and Low steam level ( ), a beep
sound would be heard for each LCD control button pressing.
11.
The steam station pressure will increase step by step as
12.
The will disappear in the LCD, when the steam station reached the
appropriate heat
13.
Pilot Light goes off when the required temperature for
the iron unit is reached.
14.
The appliance is ready to use.
15.
Press the Steam Button for steam ironing.
16.
Turn the Temperature Dial on the iron unit in anti-
clockwise direction to “Min” and the iron is switched
off.
17.
Press the Power On/Off switch, the base console will
switch to “Standby mode” with a beep sound.
18.
Disconnect the power cord from mains supply outlet.
19.
When the appliance gets cool completely, store it in a safe place. For the power
cord & steam supply cord storage see the Fig 2
Fig 2
Содержание SISS2280
Страница 1: ...Page 1 of 12 General Safety Instructions...