Singer SGR-18300, Инструкция по эксплуатации

Страница: 8 / 32

8
ENGLISH
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to scrape
the soleplate.
2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on
the steam generator and the thermal insulating cushion with dry cloth.
3. To not damage the soleplate, we advise you never put the soleplate on a
metal surface. Clean your steam generator after every 10 times of use.
4. When do not use the appliance for a long time, pour out the water in the
tank, and store the iron on the thermal insulating cushion.
5. Wind the iron cord and power cord around the cord winding groove.
Type of water to use
You can use normal tap water to fi ll the tank. Therefore, especially if your tap
water is very hard, we advise you to mix it with distilled water or use distilled
water only. We advise you to empty the water tank after use.
Do not add anything to the contents of the boiler and do not use water from
clothes dryers, scented or softened water, water from refrigerators, batteries,
air conditioners and rain water. These contain organic waste or mineral
elements that become concentrated when heated and cause brown staining
or premature wear to the steam generator. Use of these types of water will
negate the guarantee provided with the product.
REDUCE LIMESCALE
In order to improve the effectiveness of steam and prolong the boiler life of your
product, you can reduce the formation of limescale by using the household
descale for cleaning steam generators SINGER CALC OUT (follow directions
on the packaging).
You can
fi nd SINGER CALC OUT in authorized SINGER service centers.
IRONING TIPS
- Always check fi rst whether a label with ironing instructions is attached to the
article. Follow these ironing instructions in any case.
- The iron heats up quicker than cooling down; therefore, you should start
ironing the articles requiring the lowest temperature such as those made of
synthetic
fi ber.
- If the fabric consists of various kinds of fi bers, you must always select the
lowest ironing temperature to iron the composition of those fi bers.