Singer SGR-18300, Инструкция по эксплуатации

Страница: 7 / 32

7
ENGLISH
REPLACEMENT OF FILTER
Caution: Disconnect the appliance from the power supply and allow the
appliance to cool down for 60 minutes at least, before storing in a clean
and dry place.
Follow the procedure below to replace the fi lter:
I. Slide out the water tank from the base (Fig.1) and take out
the
fi lter from the water tank (Fig.2).
II. Replace it with a new one.
III. Put the new
fi lter into the water tank (Fig.3).
IV. Fill water into the water tank up to the MAX fi ll level (Fig.4)
and slide the water tank into the base again (Fig.5).
ANTI-SCALE SYSTEM
1. The fi lter is designed to reduce the build-up of lime scale which occurs during
steam ironing. This will prolong the life of your steam station. However, note
that the
fi lter will not completely stop the natural process of lime scale build-
up.
2. The fi lter should be replaced with a new one after about a 2-3 month use. The
working life of the fi lter depends on the type of the local water used. If you
exceed the working life of the fi lter, you can continue to use the appliance
but lime scale will be built up in the steam chamber. It is proposed to replace
with a new
fi lter as soon as possible.
CLEANING AND MAINTENANCE
Before cleaning, fi rstly disconnect the power outlet and let the appliance cool
down.
1. Empty the boiler above a sink and rinse it a few times with clear water. Wipe
fl akes and any other deposits on the soleplate with a damp cloth or a non-
abrasive (liquid) cleaner.
Fig.1
Fig.3 Fig.2
Fig.5
Click
Fig.4
MAX