Singer SGR-18300, Инструкция по эксплуатации

Страница: 6 / 32

6
ENGLISH
3. Turn the temperature switch to your desired setting, which is depended
on the fabric of garment, and then the temperature indicator will illuminate.
Refer to IRONING TIPS latter. The iron starts heating.
5. When the temperature indicator turns off, the selected temperature is
reached. You can now start ironing.
WARNING: Never touch the hot soleplate before cooling down!
Steam ironing
1. Grasp the water tank’s handle with your hand and take out the water tank
and open it. Now you will be able to add water into it. The max capacity of
water tank is 1L, the water level shall not be exceeded the MAX mark.
2. Replace the detachable water tank properly.
3. Connect the plug to the wall outlet, press down the On/Off switch. The power
light will illuminate. Turn temperature switch to your desired setting, which
is depended on the fabric of garment, and the temperature indicator will
illuminate. Refer to IRONING TIPS latter.
4. Wait until the temperature indicator light goes out; it indicates the soleplate
temperature has reached the selected temperature.
5. According to your requirement, you can select the desired steam output for
each garment. Make sure that there is enough water in the tank. For short
steam bursts press the steam burst button, the appliance will not steam
continuous but will emit bursts of steam. For continuous steaming you can
use the continuous steam button.
Caution: 1) Do not touch hot soleplate before cooling down!
2) Never direct the steam at people!
6. After ironing, press down the On/Off switch for a while and the appliance will
be turned off, all the indicators will be extinguished. Remove the plug from
the wall socket. But the soleplate is still hot, never touch it.
7. After cooling down, you can place the iron onto the thermal insulating
cushion.
Caution: During the operation or after fi nish ironing, never place the hot
soleplate on any area except the thermal insulating cushion.