ENGLISH – 7
Using the
Intelligent Steam Press
3. Lay fabric flat on Ironing Board.
4. Intelligent Steam Press is ready when Pressing
Indicator Light illuminates. If pressing wool, cotton or
linen you may choose to spray with a burst of steam
using Steam Burst Buttons. This function is available
once Steam Burst Ready Indicator Light illuminates.
See “Steam” section before applying steam.
5. To press, lower Pressing Plate gently onto fabric and
Ironing Board. Hold there for 8-10 seconds, then lift
Pressing Plate. Repeat until you have achieved desired
crease and smoothness.
NOTE: The unit will automatically turn off the Pressing
Plate after 10 seconds in the closed position. A beep will
emit until the unit is opened.
Once the unit is opened, it
will return to normal operation.
6. Once pressing tasks are complete, immediately turn On/
Off Switch to “Off” (O) position and unplug power cord
from electrical outlet.
STEAM OPTIONS
MANUAL (MAN) STEAM
IMPORTANT: Do not activate Steam Burst Buttons with unit com-
pletely closed, as this may damage unit. Best results are obtained
if Pressing Plate is held open approximately 3 in. (75 mm.) above
Ironing Board before pressing Steam Burst Buttons. For safety
reasons, do not hold Pressing Plate open more than 3 in. (75 mm.)
when using Steam Burst Buttons. Only use burst of steam for 1
second for best results. If Pressing Plate is left on fabric for more
than 10 seconds, it could damage fabric.
1. Hold Pressing Plate approximately 3 in. (.75 mm.) above
Ironing Board.
2. Press Steam Burst Buttons to release a burst of steam
onto fabric for 1 second.
3. Lower Pressing Plate onto fabric for 8-10 seconds, then
raise once again.
NOTE: If Pressing Plate is left on fabric for more than 10
seconds, it could damage fabric.
4. Repeat steps 1-3 above until fabric is smooth and
wrinkle-free.
AUTO STEAM
1. Hold Pressing Plate approximately 3” above Ironing
Board.
2. Press Steam Selector Button until Auto Steam “ “ il-
luminates. This activates Auto Steam and automatically
releases a burst of steam to fabric.
3. Lower Pressing Plate onto fabric, then raise once again.
4. Repeat steps 1-3 until fabric is smooth and wrinkle-free.
3”
Steam
Mode
Select
ON
/
OFF
READY
STEAM
Steam
Mode
Select
ON
/
OFF
READY
STEAM
