OCH01 1 PEREL
OCH01 – FOLDABLE CLOTHES HANGER ON CASTERS
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the OCH01! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
You will need a cross screwdriver.
2. Assembly
Take out the two wider rods (with the holes at the end) and insert a caster
on each end until you hear a clicking sound.
Insert an angle connector into each angle of both rods.
Insert both rods into the foldable support. Make sure the casters face
inwards. Fix the rods tightly by means of the included screws.
Fig. 1
Fig. 2
Fig. 3
