Singer Dry Up SDHM-20L ECO, Инструкция по эксплуатации

Страница: 12 / 64

12
ENGLISH
MODE: Press the MODE button to select the mode of operation. Five dif-
ferent modes are possible:
AUTO mode: This is the default mode selected when the Power But-
ton is turned on. In this mode, the default humidity is set to 50%
This can be changed using the Humidity button.
When the room humidity > set hu 5%, the unit works with
HIGH SPEED fan.
When the room humidity = set hu/- 5%, the unit works with
LOW SPEED fan.
When the room humidity < set humidity – 5%, the dehumidifying func-
tion is OFFand the fan is also OFF.
HIGH DEHUMIDIFYING mode: Press the MODE button once to se-
lect this mode. Here, the unit always works with high fan speed for any
room humidity.
LOW DEHUMIDIFYING mode (ECONOMY mode): Press the MODE
button twice to select this mode. Here, the unit always works with low
fan speed for any room humidity.
FAN ONLY mode: Press the MODE button three times to select this
mode. Here, only the fan operates. The default fan speed is high. You
can switch to low fan speed using the Humidity button.
INTERNAL DRYING mode: Press and hold the MODE button for
more than 2sec to select this mode. Use this mode to dry the unit
when it will not be used again for a long period. This dries the inner
body of the unit and prevents mildew. For effective drying, run the unit
in this mode for an hour.
Note: To cancel Internal Drying mode, press and hold the Mode button
for 2sec. The unit returns to the previous mode. To stop Drying mode,
press the Power button.