Simrad NSS evo3, Руководство по установке

Страница: 43 / 51

the unit, and wait a few moments as the unit restarts. Do not remove the memory card or
repower the unit until the process is completed (this typically takes no more than a couple of
minutes).
NMEA 2000 device upgrades
The update file must be loaded to the root directory of a memory card inserted in the card
reader.
1.
Select the Files toolbar option and select the update file under Memory card.
2.
Select the Upgrade option presented when the file is highlighted. A list should appear
displaying any compatible devices the update file applies to. In most cases this will be a
single device.
Ú
Note:
If no device is shown, check that the device to be updated has power, and run any
outstanding updates for the unit first.
3.
Select the device and initiate the upgrade. Do not interrupt the upgrade process.
Backing up and Importing user data
There are two files that can be backed up that relate to user changes made to the system:
• Waypoints, Routes, and Tracks database.
• Settings database (includes preferences such as unit settings, custom pages, and CZone
configuration files).
Insert a memory card into the unit's card reader as a storage location for backup data.
Waypoints, Routes, and Tracks database backup
You can export all Waypoints, Routes, and Tracks, or export only those contained within a
specific region.
If Export Region is selected, the chart page will be displayed, centered on vessel location.
Using the touch screen, adjust the red boundary box to outline the area to be exported. The
export option offers different file formats to save as:
•
User data file version 5
: Use with current units (NSO evo2/3, NSS evo2/3, NSS, NSO, NSE,
Zeus, Zeus Touch, HDS Gen2, HDS Gen2 Touch, HDS Gen3, HDS Carbon, GO XSE units,
Vulcan units, and ELITE Ti units). Offers most detail.
•
User data file version 4
: Use with current units (NSO evo2/3, NSS evo2/3, NSS, NSO, NSE,
Zeus, Zeus Touch, HDS Gen2, HDS Gen2 Touch, HDS Gen3, HDS Carbon, GO XSE units,
Vulcan units, and ELITE Ti units).
•
User data file version 3 (with depth)
: Use with legacy GPS chartplotters.
•
User data file version 2 (no depth)
: Use with legacy GPS chartplotters.
•
GPX (GPS Exchange, no depth)
: Use with some other manufacturers’ GPS products, and
PC applications.
After you select the file type, select Export and destination memory card. The receiving
GPS/PC typically needs to be set to allow import of Waypoints.
Settings database export
Select
Setting database
to export the Settings database, or export CZone configuration
(CZone installation dependent). Choose the desired option and select the memory card
destination.
Importing a database
Later, if the unit has been restored to factory defaults or user data is accidentally deleted,
return to the files page, select the backed up file, and then
Import
. View file details for
creation date.
44
Software Setup | NSS evo3 Installation Manual