Simrad NSS evo3, Руководство по установке

Страница: 16 / 51

Power Control to ignition
Device will turn on once ignition is turned on to start engines. Connect the yellow wire to the
accessories output of the engine key switch.
Ú
Note:
Engine start batteries and house batteries should have a common ground
connection.
+ _
5
1
2
3
4
6
1
Power cable connector to unit
2
Positive wire (red)
3
Ground wire (black)
4
Power control wire (yellow)
5
Alarm wire (blue)
6
Ignition switch
Power Control master/slave bus
Turning on the ‘master’ device turns on connected ‘slave’ devices.
+ _
5
2
1
6
7
4
3
A B
POWER
POWER
A
Power connection to unit on the left
B
Power connection to unit on the right
1
Power cable connectors to units
2
Radar interface box
3
Audio entertainment device (e.g. SonicHub2)
4
Ground wire (black)
5
Positive wire (red)
6
Power control wire (yellow)
Wiring | NSS evo3 Installation Manual
17