Simrad NAIS-500, Руководство пользователя

Страница: 17 / 36

| 15
Installation | NAIS-500 User Manual
Connection to a PC or Mac
If you choose to use a PC or Mac with suitable charting software
to display received AIS messages from other vessels, this can be
accomplished by connecting to the USB connector on the AIS
transceiver.
Installation procedures
Before beginning the installation of your AIS transceiver, please en-
sure you have the necessary additional items as detailed in the previ-
ous section Preparing for installation. It is strongly recommended that
you read all of the instructions in this manual prior to installation.
If, after reading this manual, you are unsure about any element of
the installation process, please contact your dealer for advice.
The following sections explain the installation process step by step
for each of the main elements of the system.
Step 1 - Installing the NAIS-500 AIS transceiver
Please note the following guidelines when selecting a location for
your AIS transceiver:
•
The compass safe distance of this unit is 0.55 m or greater for 0.3°
deviation.
•
There should be adequate space around the AIS transceiver for rout-
ing of cables. See Figure 5 for details of the AIS transceiver dimen-
sions.
•
The ambient temperature around the AIS transceiver should be
maintained between -15°C and +55°C.
•
The AIS transceiver should not be located in a flammable or hazard-
ous atmosphere such as an engine room or near fuel tanks.
•
The AIS transceiver is fully waterproof to ingress protection rating
IPx7. However, it is recommended that the AIS transceiver not be
subjected to extended periods of exposure to spray or submersion.
•
It is acceptable to mount the AIS transceiver either vertically or
horizontally.
•
It is recommended that the AIS transceiver is installed in a ‘below
deck’ environment.
•
The product is supplied with four selftapping screws for attachment
of the AIS transceiver to a suitable surface. Please refer to Figure 6 for
guidance.
•
The AIS transceiver should be mounted in a location where the
indicators are readily visible as these provide important information
on the status of the AIS transceiver.