background image

8 | 

About your AIS class B transceiver | 

NAIS-500 User Manual

About your AIS class B transceiver

About AIS

The marine Automatic Identification System (AIS) is a location and 
vessel information reporting system. It allows vessels equipped with 
AIS to automatically and dynamically share and regularly update 
their position, speed, course and other information such as vessel 
identity with similarly equipped vessels. Position is derived from the 
Global Positioning System (GPS) and communication between ves-
sels is by Very High Frequency (VHF) digital transmissions. 
There are a number of types of AIS device as follows:

• 

Class A transceivers.

  These are similar to class B transceivers, but 

they are designed to be fitted on large vessels such as cargo ships 
and large passenger vessels. Class A transceivers transmit at a higher 
VHF signal power than class B transceivers and therefore can be 
received by more distant vessels, and also transmit more frequently. 
Class A transceivers are mandatory on all vessels over 300 gross 
tonnes on international voyages and certain types of passenger ves-
sels under the SOLAS regulations. 

• 

Class B transceivers. 

 Similar to class A transceivers in many ways, 

but are normally lower cost due to the less stringent performance 
requirements. Class B transceivers transmit at a lower power and at a 
lower reporting rate than class A transceivers. 

• 

AIS base stations.

  AIS base stations are used by Vessel Traffic Sys-

tems to monitor and control the transmissions of AIS transceivers. 

• 

Aids to Navigation (AtoN) transceivers.

  AtoNs are transceivers 

mounted on buoys or other hazards to shipping which transmit 
details of their location to the surrounding vessels. 

• 

AIS receivers.

  AIS receivers will generally receive transmissions 

from class A transceivers, class B transceivers, AtoNs and AIS base sta-
tions but do not transmit any information about the vessel on which 
they are installed. 

• 

This NAIS-500 product is an AIS Class B transceiver.

NAIS-500 unit

NAIS-500

2

Содержание NAIS-500





































Отзывы: