Simrad NAIS-500, Руководство пользователя

Страница: 23 / 36

| 21
Installation | NAIS-500 User Manual
versa. This is particularly useful when using a chartplotter having
only a single NMEA 0183 port. An additional sensor, such as a gyro-
compass, can be connected to the AIS transceiver via the low speed
port and the AIS transceiver can be connected via the high speed
port to the chartplotter resulting in the chartplotter receiving both
AIS information and heading information simultaneously. Please
ensure your equipment is configured to use the correct baud rate
for the port it is connected to.
Fig. 11 NMEA0183 data
Tr
Transmit –
Power in +
Power in –
Switch input +
Switch input –
R
Receive –
Brown
Blue
Light green
Orange
Red
Black
White
Green
Purple
Pink
Grey
Yellow
Tr
Transmit –
R
Receive –
NMEA0183
Port 1
38,400baud
(chart plotter)
NMEA0183
Port 2
4,800baud
(other NMEA0183 device)
Figure 11 Connecting to the NMEA 0183 data port
Step 7 - Connection to an NMEA 2000 network (optional)
The AIS transceiver can be connected to an NMEA 2000 network
by a suitable Navico NMEA 2000 network cable. If your vessel has
a NMEA 2000 network, please refer to the relevant documentation
for your NMEA 2000 equipment. Once connected, and with your
chartplotter also connected to your NMEA 2000 network, you will
be able to receive AIS targets on your chartplotter.
Step 8 - USB Connection (optional)
The AIS transceiver is supplied with a USB port for connection to
a PC or Mac. The USB connector can be connected directly to the
USB port on the PC or Mac via the supplied USB cable. To enable
connection of the AIS transceiver to a PC, the USB drivers must be
installed first.
Please install NAIS System Configurator as described in section 4
before attempting to connect the USB port to a PC.