Simrad - HH33 Installation and Operation Instructions
56
DSC CALL
DIST LOG
LL REPLY
>TRACK BUDDY
TRACK BUDDY
SET BUDDY
TRACK LIST
>INTERVAL
INTERVAL
>15 MINUTES
30 MINUTES
1 HOUR
Press CALL/MENU to enter DSC mode, then select TRACK BUDDY.
1.
Select INTERVAL, and choose the desired time interval. Press ENTER to confirm.
2.
5-9-4 Start Tracking
Start tracking as follows:
START TRACK
> YES
NO
DSC CALL
DIST LOG
LL REPLY
> TRACK BUDDY
TRACK BUDDY
> START BUDDY
SET BUDDY
TRACK LIST
SET TRACK
KATHY 1 OFF
SAM 2 ON
BUDDY #3 3 OFF
Press CALL/MENU to enter DSC mode, then select TRACK BUDDY.
1.
Select START TRACK, then YES.
2.
(The START TRACK display changes to STOP TRACK. To stop tracking at any time, just
3.
press YES.)
As soon as you start tracking, an LL Request is sent immediately on CH70 and your radio;
and it waits for acknowledgement of the (first) buddy’s LL position to be displayed on
your radio screen.
Each of the selected buddies is polled for their LL positions at regular time intervals.
When information is received, a friendly ring tone sounds and the position is shown on
the screen. Pressing any key cancels the screen.
The position that is received is not stored in your radio’s Log, but is broadcast over
NAVBUS to the Chartplotters. Press any key to acknowledge, or wait for the automatic 20
second timeout.
Note:
The HH33 is capable of receiving and displaying the LL position data at normal or
enhanced resolution.
5-10 Receive an All Ships call
The DSC icon on the screen flashes and the call alert sounds when the radio receives
1.
an ALL SHIPS call from another boat or a coast station within range. A call alert with
a friendly two-tone cycle indicates a ROUTINE call.
A call alert with a cycle of 6 beeps followed by a 2 second pause indicates an URGEN-
CY or DISTRESS call.
