Simrad GO XSE Series, Руководство по установке

Страница: 58 / 73

When the feature is also enabled in the advanced settings features
dialog:
• An Evinrude icon is added to the home page - select it to display
the engine instrument panel.
• An Evinrude settings dialog is added - use this dialog to change
engine settings.
• An Evinrude button is added to the control bar - selecting this
button opens the engine controller. Use the engine controller to
control the engines.
For more information, refer to the engine manual or engine
supplier.
Power-Pole
Power-Pole anchors
This device can interface with the Power-Pole anchors via Bluetooth.
When the anchor(s) are paired with this device, the Power-Pole
button is added to the control bar.
For more information about Bluetooth pairing and Power-Pole
anchor operation, refer to the Operator manual.
Power-Pole Charge module
This device can interface with the Power-Pole Charge module via
the C-Monster gateway. Only one gateway can work on the NMEA
2000 network at a time.
When valid data is received from the gateway, the Charge button is
added to the control bar.
For more information about the battery charge functionality, refer
to the Operator manual.
For installation, wiring and setup information, refer to the Power-
Pole documentation supplied with the Charge module.
FLIR camera setup
Compatible FLIR cameras are plug and play when used in
conjunction with a device acting as a DHCP host. For setup on
networks not utilizing a DHCP host, refer to the website
www.simrad-yachting.com, or contact technical support.
FLIR settings can be found in the advanced settings dialog.
58
3rd party support | GO XSE/XSR Installation Manual