Simrad ES 18 - DATASHEET REV C, Руководство по установке

Страница: 32 / 88

30
404770/B
3 Open the shipping box.
Note
Be careful! Do not use heavy tools. Do not use excessive force. Make sure that you
do not damage the transducer or the cable.
4 Lift the transducer straight up and out of the box.
Note
DO NOT lift it by the cable!
5 Place the transducer on the cart for transport to the mounting location.
6 Transport the transducer carefully to its mounting location.
Related topics
Installing the transducer, page 21
Installing the transducer cable
When the transducer has been placed under its mounting location, the cable can be
pulled through the cable gland and bushing, and then through the steel conduit up
to the transceiver.
Prerequisites
Before you can do this task, the following prerequisites must be met:
• All relevant work instructions, procedures and standards must be available.
• The bushing has been installed.
• The steel conduit is mounted with all installation work finalized.
• All relevant drawings have been approved by the classification society.
• All relevant personnel (skilled shipyard workers, ship electricians) and their tools
must be available.
You must be equipped with a standard set of tools. This tool set must comprise the
normal tools for electronic and electromechanical tasks. This includes different
screwdriver types, pliers, spanners, a cable stripper, a soldering iron, etc. We recommend
that all tools are demagnetized to protect your equipment. The following specific
consumables are required for this task:
• Fish tape
• Electrical tape
• Cable ties
Simrad ES18 Installation Manual