Simrad ES 18 - DATASHEET REV C, Руководство по установке

Страница: 3 / 88

404770/B
July 2020 © Kongsberg Maritime AS
Simrad ES18
Split-beam transducer
Installation Manual
The purpose of this manual is to provide the information, procedures
and basic drawings required for the physical installation of the
Simrad ES18. The manual further provides relevant descriptions and
illustrations to explain the basic principles for location and noise
considerations.
Note
The installation shipyard must provide all necessary installation
drawings. If required, all documents provided by the shipyard
for the physical installation of the ES18 must be approved by the
vessel’s national registry and corresponding maritime authority
and/or classification society. The shipowner and shipyard doing the
installation are responsible for obtaining and paying for such approval.
• About this manual, page 5
• Introduction, page 7
• Transducer handling and maintenance, page 13
• Installing the transducer, page 21
• Cable layout and interconnections, page 37
• Transducer installation principles, page 47
• Where to install the transducer, page 63
• Drawing file, page 70