Simrad ce32 mkii, Руководство пользователя

Страница: 64 / 130

3AVE ON $ATA#ARD
0RESS
[2]
TO CALL UP THE $ATA#ARD STATUS WINDOW
- with the obtion to save the
USER DATA
on the DataCard
as backup or storage of special routes, etc.
0RESS
[ENT]
TO TRANSFER A COPY OF ALL USER DATA FROM
THE #% -+)) TO THE $ATA#ARD INSERTED IN THE DRAWER
* Note! When transferring data to the DataCard, it will
overwrite all existing data on the DataCard. The ’save’
time is approx. 5 to 10 minuts.
,OAD FROM $ATA#ARD
0RESS
[3]
TO CALL UP THE $ATA#ARD STATUS WINDOW
- with the obtion to load all the data stored on the Data-
Card into the unit’s memory.
0RESS
[ENT]
TO TRANSFER A COPY OF ALL THE DATA STORED
ON THE $ATA#ARD INTO THE UNIT S MEMORY
** Note! When transferring data from the DataCard
to the CE32 MKII it will overwrite all existing user
data in the unit’s memory. The ’load’ time is normally
less than 1 minute.
F
During all data transfers there will be an INFO win-
dow on the screen which informs of the process. These
INFO windows will remain on the screen for as long as
the transfer is active, and inform if the transfer was suc-
cessful or not.
However, please keep an eye on the screen, because the
’Load: OK’ or ’Wrong data type’ sign does not wait for
your acknowledgement, but disappears after a few sec-
onds.
3
2
ENT
ENT
#HAPTER #% -+)) 7AYPOINTS AND NAVIGATION
64