Simrad ce32 mkii, Руководство пользователя

Страница: 17 / 130

$RAW LINE
To draw lines or to make a route is the
same procedure, please refer to above point 4.
0LOT TARGET
Plot and save the cursor position as a
special target position. You will receive a display ’Set
up target’ where it is possible to alter the position, in-
sert a location name and select a color for the target
number and symbol.
"EARING AND DIST FROM ! TO "
You can quickly ob-
tain your bearing and distance from your current posi-
tion to an arbitrary point. Place cursor on first position
(A) and press
[PLOT]
, then place cursor on second posi-
tion (B). Bearing and distance will now be calculated
from position A to B, and the data will be shown in a
small info window. Press
[MENU]
to exit the function.
$IST AND 44' IN ROUTE FROM ! TO "
Navigational in-
formation from one route point to another is easily ob-
tained by placing the cursor on the first route point (A)
and press [ENT], then move to the second route point
(B) and press [ENT]. This will activate the "Route cal-
culation" display, which will inform of Total distance
from A to B, Time to go from A to B, Arrival time, etc.
3ET VERTICAL MARK
This function will set a vertical
marker (line) at the current ping in the Echo display.
On the front of the CE32 MK
II
below the keypad is a
small watertight drawer wherein you place the C-MAP
cartridge you wish to load.
F
Do not attempt to insert or remove cartridges unless the
CE32 MKII is turned off or chart reading is in stand-by:
,OAD DISPLAY FOR INSERTIONREMOVAL OF #-!0 CARTRIDGE
#-!0 CARTRIDGES #CARDS
KEYS TO PRESS
MENU 1,3
#% -+)) #HART AND POSITION MENUS #HAPTER
17