16
18.5
Care
1.
When the Instrument is not in use, set the ON/OFF switch to OFF to prevent
battery discharge if the test lead clips should accidentally be shorted to-
gether.
2.
If the Instrument is to be stored for more than one month, remove the battery
to avoid corrosion damage.
3.
Instruments subjected to rough handling and/or transport should be checked
frequently for specified accuracies. If such facilities are not available. the
Instrument may be sent to the factory Service Department for an overall
checkout, repair, if needed, and calibration.
When an Instrument must be stored and/or transported in a vehicle in very cold
weather, it will be subject to condensation when brought into a warm building.
Therefore, do not attempt high voltage measurements until certain that the Instru-
ment is completely dry.
!
www.
.com
1.800.561.8187
