Simpro QUIKSTAK QS10MM, Руководство пользователя

Страница: 31 / 52

User Manual // Quikstak QS10MM
Original Instructions // English // v52.0 // April 2022 // Page
30
4.7 Quikstak Height-Levelling System
If your machine does not have a height-levelling system, please disregard this section.
4.7.1 Control panel
The control panel for the Quikstak height-levelling system consists of an adhesive membrane,
with integrated buttons and an LED lamp. A ribbon cable connects the membrane to the
PLC and power supply. If damaged, the membrane can be simply replaced as a single unit.
4.7.2 PLC
The height-levelling system is controlled by an APB-12MRDL PLC, which is mounted on a DIN
rail inside the fascia. The PLC has a USB port, an LCD screen, and buttons for altering program
parameters. PLC programming software is available from Simpro.
Authorisation must be obtained from Simpro before any changes are made to the PLC
programming.
4.7.3 Laser sensor
The height-levelling system uses a Sick DT35 laser sensor mounted on the mast to measure the
height of product stacked on the forks. Data from this sensor is transmitted to the PLC through
a plug-n-play cable running down the mast. The sensor has a plug-n-play connection, so in
the event of failure it can be replaced without removing the data cable.
4.7.4 LED strobe light
An LED strobe light is mounted on the mast adjacent to the laser sensor. When the height-
levelling system is active, this strobe provides a visual cue to personnel in the area. A variety
of strobe patterns can be selected.
Membrane 0790050489
0210050006
Sensor 0790050462 Cable 0790050463
0250050151