9
SimpliFire • SF-ALLP50-BK, SF-ALLP60-BK, SF-ALLP72-BK • 2044-980 Rev. C • 10/19
4
INSTALLATION
WARNING!
Risk of Personal Injury or Property Dam
-
age!
Failure to install the appliance as instructed below
may result in damage to the equipment and or may ex-
pose the user to the risk of fire, serious injury, illness or
death.
There are two options for the appliance installation:
• Recessed into a 2 x 6 in. wall - Section 4.B.
• Mounted directly on the wall - Section 4.C.
The appliance can be recessed into the wall. When
installed in a recessed opening on an exterior wall in
cooler climates, a chase may be required by local build-
ing codes to accommodate insulation.
5-3/4 to 6-1/2 in.
WALLBOARD SHEATHING
AND/OR FINISHING MATERIAL
UP TO 1 IN. THICK
19 1/2 in.
A
WALL WALLBOARD
SHEATH TO EDGE
OF FRAMED OPENING
Figure 4.1 Framing and Wall Finishing for Recessed Installation
The chase should be constructed in a manner of all out-
side walls of the home to prevent cold air drafting prob-
lems. The chase should not break the outside building
envelope in any manner. Walls, ceiling, baseplate, and
cantilever floor of the chase should be insulated. Va
-
por and air infiltration barriers should be installed in the
chase as per regional codes for the rest of the home.
Additionally, in regions where cold air infiltration may
be an issue, the inside surfaces may be drywalled and
taped (or equivalent method may be used) to achieve
maximum air tightness.
NOTICE:
Insulation and other loose materials must be
secured to maintain the air clearance between the appli-
ance and interior envelope of the wall opening. This will
ensure that the appliance can circulate air to its room
temperature sensor for maximum performance of the
Thermostat function.
Model
A
SF-ALLP50-BK
in.
51
mm
1295
SF-ALLP60-BK
in.
61
mm
1549
NOTICE:
These instructions are not substitutes for the
requirements of local building codes.
Adjust framing dimensions for interior sheathing (wallboard sheathing).
6-1/2 in.
max.
Wallboard Sheathing
2 X 6 RECESSED
MOUNTING SCREWS X 4
Model
A
SF-ALLP72-BK
in
73
mm
1854
