6903-002008 <01>
11
5
Manage Cables
5-1
Release TV from wall plate
5-2
Route cables
5-3
Secure TV to wall plate
IMPORTANT!
If the cable input/output connection panel is located on
the back of the TV and the connections point out toward the wall,
use the 90° HDMI adapter
[02]
to prevent bending or pinching your
HDMI cable between the wall and the TV.
While holding your TV, push kick stands
(k)
upward and then gently
ease your TV back toward the wall. Kick stands
(k)
will move back into
place as the TV latches onto the wall plate.
(c)
(k)
(k)
(c)
[02]
[02]
(k)
(k)
(k)
Pull and hold release cords
(c)
down
while gently pulling the TV away
from the wall. Kick stands
(k)
will fall
into place.
CAUTION:
Avoid potential
injuries or property damage!
Ù
To prevent breaking the locking
latch: always pull and hold the
release cords
(c)
down while
pulling the TV away from the
wall.
Ù
TV is not secured to the
wall when it is in the kick
stand postion. Assistance is
recommended for this step.
☺
