Simplex TrueAlert 4009 Series Скачать руководство пользователя

Страница: 1 / 20

579-1019 Rev M

4009 IDNAC Repeater Installation Instructions

*05791019M*

Cautions, Warnings, and Regulatory Information

READ AND SAVE THESE INSTRUCTIONS

Follow the instructions in this installation manual. These instructions must be followed to avoid damage to

this product and associated equipment. Product operation and reliability depend upon proper installation.

DO NOT INSTALL ANY SIMPLEX™ PRODUCT THAT APPEARS DAMAGED

Upon unpacking your Simplex product, inspect the

contents of the carton for shipping damage. If damage is apparent, immediately file a claim with the carrier and notify an authorized

Simplex product supplier.

ELECTRICAL HAZARD

Disconnect electrical field power when making any internal adjustments or repairs. All repairs should be

performed by a representative or an authorized agent of your local Simplex product supplier.

STATIC HAZARD

Static electricity can damage components. Handle as follows:

• Ground yourself before opening or installing components.
• Prior to installation, keep components wrapped in anti-static material at all times.

SULFURIC ACID WARNING

Battery contains sulfuric acid, which can cause severe burns to the skin and eyes and can destroy

fabric. Replace any leaking or damaged battery while wearing appropriate protective gear. If you come in contact with sulfuric acid,

immediately flush skin or eyes with water for 15 minutes and seek immediate medical attention.

Introduction

The 4009 IDNAC Repeater is a TrueAlertES Addressable device that extends the maximum wiring distance supported by the IDNAC Signaling Line

Circuit (SLC).
The IDNAC Repeater is compatible with Fire Alarm Control Panels (FACPs) that use the Extended Power Supply (EPS and EPS+).

The following lists IDNAC Repeater models:

• 4009-9601 120 V/240 V Platinum UL/ULC
• 4009-9602 120 V/240 V Red UL/ULC
• 4009-9601 BA 120 V/240 V Platinum UL/ULC assembled in USA.
• 4009-9602 BA 120 V/240 V Red UL/ULC assembled in USA

CAUTION

DISCONNECT

BEFORE

BATTER

A.C. POWER

Y AND

SERVICING

Fig 1: 4009 IDNAC Repeater

Содержание TrueAlert 4009 Series





















Результаты поиска

Содержание TrueAlert 4009 Series

Отзывы:

Похожие инструкции для TrueAlert 4009 Series

Бренды по названию

Популярные бренды

Simplex TrueAlert 4009 Series, Руководство по установке

Результаты поиска

Содержание TrueAlert 4009 Series

Отзывы:

Похожие инструкции для TrueAlert 4009 Series

Бренды по названию

Популярные бренды