Simplex TFX-500M, Руководство оператора, Страница: 17 / 44

9
1.6. Quick Response— System Reset
The System Reset function resets the panel to Standby, and turns off outputs.
* CAUTION: *
Do not reset the system until the cause of the alarm, supervisory, or trouble condition
has been removed and alarms have been silenced.
Figure 1--9 Resetting the AUTOCALL TFX-500M/800M fire alarm system.
Key
FIRE
TROUBLE
SUPERVISORY
POWER
PANEL SILENCE
ALARM SILENCE
SYSTEM RESET
DRILL
ENABLE
OFF
LAMP
TEST
1 2 3
4 5 6
7 8 9
0
NO YES
DELETE ENTER
FAST
ACCESS
B
Y
OPERATOR DISPLAY MODULE
QUIT
FIRE ALARM
Main Workshop
Zone 2 A48 001
FIRST SILENCE
ALARMS
RESET
SYSTEM
To reset the system:
1. Accept events.
2. Insert the key and turn the keyswitch to Enable (12 o”clock position) position.
3. Press
ALARM SILENCE
to silence the signalling appliances.
4. Press RESET to reset the system.
The display panel will respond as follows:
Resetting...
countdown 30
The timer will count down from its starting point to zero, then the system will reset (at the end of the count-down period, the
power to the 2-way data circuits will be reduced to reset latching devices). All alarm outputs will remain active during the
countdown. The alarm outputs will de-activate only if all the inputs have cleared. The display will respond as follows:
reset completed
firealarmresources.com