Simplex, Inc., 5300 Rising Moon Road, Springfi eld, IL 62711-6228 • 217-483-1600 • Fax 217-483-1616
SPump6-HMI.indd (7/11) • © 2011 Simplex, Inc. All Rights Reserved. • Printed in the USA. • www.simplexdirect.com
FUEL SUPPLY SYSTEM MANUAL with Touchscreen • SmartPump • page 2 of 22
®
DESCRIPTION
The Simplex Fuel Supply
System provided on this
work order consists of
a Simplex Smart-Pump
designed to transfer fuel
from gravity trucks to an
above ground fuel stor-
age tank, control the fi ll-
ing operation to prevent
overfi lling of the tank, and
allow for full draining of
the truck delivery hose.
A fl oatswitch assembly is
shipped loose for installa-
tion on the above ground
fuel storage tank.
INSTALLATION
1. Anchor the Smart-
Pump to concrete pad
using mounting holes
provided in the base
of the unit.
2. Connect to an earth
ground using the
threaded ground stud
in the lower left-hand
corner of left-hand side panel. Con-
nect ground wires from SmartPump
to the above ground storage tank.
3. See Piping Drawing:
a. Connect the outlet of SmartPump
to the above ground storage tanks
using 3 inch steel pipe or black
iron pipe.
b. Install the SmartPump Trans-
ducer, Floatswitch assembly and
optional Tank Leak Floatswitch,
if provided, in the appropriate
NPT fi ttings in the top of the fuel
storage tank.
Part of Typical Piping Diagram
ALL PIPING MUST RISE ABOVE
THE SMARTPUMP. Low spots
can cause air locks in the line
and prevent proper pump op-
eration.
To prevent an accidental spill
due to siphon backfl ow the tank
must have drop tube with an
anti-siphon bleed hole.