Simplex 4190-9013, Руководство по установке

Страница: 3 / 16

3
Follow the steps below to enter the default setting mode and change the printer's
default settings.
Note:
To print the language selection and default setting mode instructions,
you need 5 sheets of letter- or A4-size single-sheet paper or 5 pages of
continuous paper. If you use single sheets, you need to load a new
sheet each time the printer ejects a printed sheet.
1. Make sure paper is loaded and the printer is turned off.
Caution: Whenever you turn off the printer, wait at least 5 seconds
before turning it back on; otherwise you may damage the
printer.
2. While holding down the Font button, turn on the printer. The printer enters
the default-setting mode and prints the language selection instructions.
3. If you need to select a different language, press the Font button until the
Font lights indicate the language you want, as described in the language
selection instructions.
4. Press the Tear Off/Bin button to confirm your language selection and print
the current default-settings.
5. If you do not need to change any settings, go to step 6. If you want to
change any of the default settings, press the Tear Off/Bin button to print the
instructions (three pages) in the language you selected.
6. Follow these instructions to change the default settings using the buttons on
the printer control panel.
Note: The arrows on the instruction sheets indicate the printer's current
settings.
7. When you finish, turn off the printer and exit the default setting mode. The
current settings remain in effect until you change them again.
Your Printer's Default Settings,
Continued
Changing Default Settings
firealarmresources.com