Simplex 4100-3115 XALIC, Инструкция по установке и программированию

Страница: 1 / 32

4100-3115 XALIC
Installation and Programming Guide
© 2005- 2011 SimplexGrinnell LP. All rights reserved.
Specifications and other information shown were current as of publication and are subject to change without notice.
Simplex and the Simplex logo are trademarks of Tyco International Ltd. and its affiliates and are used under license.
579-513
Rev. D
This publication describes installing and programming the 4100-3115 XA Loop Interface Card
(XALIC). This card allows a 4100U or a 4100ES Fire Alarm Control Panel (FACP) to function as
either the XA Loop Master or as an XA Loop Slave.
This card is compatible with a 4100U FACP or a 4100ES FACP.
This publication discusses the following topics:
Topic See Page #
Cautions and Warnings 2
Overview and Specifications 3
Hardware Configuration 6
Hardware Installation 10
Connecting to the XA Loop 12
Programming the FACP as XA Loop Master 16
Programming FACP as an XA Loop Slave 20
FACP XA Loop Slave Application Example 26
FACP XA Loop Master Application Example 29
Introduction
In this Publication
firealarmresources.com