SL-881 6G Handheld HDMI/MHL Audio and Video Generator/Analyzer
User Guide
14
© 2016-2017 Simplay Labs, LLC.,
Simplay-UG-02001-E
All rights reserved. CONFIDENTIAL
Reading EDID Contents from HDMI OUT Ports
The SL-881 can be used to read EDID contents from a sink device or the input port of repeater device. The 256-byte raw
data, which is in Hex mode, of EDID contents from a sink device or input port of a repeater device can be read out and
displayed in the LCD touch screen of the SL-881 in this test.
This procedure shows how to read EDID contents from the HDMI OUT ports.
1.
Use the HDMI cable to connect the sink device to the SL-881 HDMI OUT 1 port, as shown in
2.
Power on the SL-881.
3.
On the LCD touch screen (
), choose EDID Read. The Read EDID from Sink DUT window appears
).
Read EDID from Sink DUT (From HDMI OUT1)
Refresh
Block 1
Block 0
00
01
02
03
04
05
06
07
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
Save
Write
Figure 2.7. Read EDID from Sink DUT Window
You can use the Block 0 or Block 1 tab to select which part of EDID contents to display. Use the Refresh button to read
EDID contents from the HDMI OUT 1 port. Use the Write button to program current EDID content to AVG HDMI IN port.
Use the Save button to save current EDID content to SD card.