SL-881 6G Handheld HDMI/MHL Audio and Video Generator/Analyzer
User Guide
10
© 2016-2017 Simplay Labs, LLC.,
Simplay-UG-02001-E
All rights reserved. CONFIDENTIAL
2.
The SL-881 in Standard Test Mode
In its standard test configuration, the SL-881 offers audio and video test features to enable compliance testing to
HDMI 2.0a and MHL 3.x specifications.
For standard mode operation, no additional optional software installation is required.
These are the operations that are available in the standard test mode:
1.
Generate output signal using HDMI OUT ports
2.
Analyze input signal using HDMI IN port
3.
Perform Factory timing test using HDMI OUT ports
4.
Load EDID data to HDMI IN port
5.
Read EDID contents from devices connecting to HDMI OUT ports
Notes:
When in Standard test mode, testing with source device or the output port of repeater
devices, you can perform actions 2 and 4 mentioned in
Section 2.3
and
Section 2.5
When in Standard test mode, testing with sink device or the input port of repeater
devices, you can perform actions 1, 3, and 5 mentioned in
Section 2.2
Section 2.6
, and
Section 2.4
Setting up Connections
Connect the SL-881 to the source device or the output port of the repeater or sink device or the input port of the
repeater device before performing any test.
•
When testing with HDMI Source device or the output port of repeater device, connect the SL-881 to your source
device in the way shown in
HDMI Source Device
HDMI Cable
Figure 2.1. Connecting with HDMI Source Device in Stand-alone Mode
•
When testing with HDMI Sink device or the input port of the repeater device, connect the SL-881 to your sink
device in the way shown in
HDMI Cable
HDMI Sink Device
Figure 2.2. Connecting with HDMI Sink Device in Stand-alone Mode