8 Programming
For programming information, please refer to the LSM
manual and the system manual of the corresponding
SmartRelay.
9 Configuring the address for mod-
ules
Each connected module is actuated using its address.
This address is set on the address switch. If you
connect a SmartOutput module to a SmartRelay 3, set
the following addresses:
Module
Address
Module 1
0 (initial setting in the factory)
Module 2
1
Module 3
2
Module 4
3
Module 5
4
Module 6
5
Module 7
6
Module 8
7
Module 9
8
Module 10
9
Module 11
A
Module 12
B
Module 13
C
Module 14
D
MOD.SOM8
8. Programming
33 / 140
EN
