Simoniz 39-9027-4, Руководство пользователя

Страница: 10 / 16

10
Your Simoniz
®
Buffer/Polisher is designed
with Random Orbit technology. The tool will
perform better when less pressure is
applied. Applying excessive pressure will
slow down the random motion and reduce
the effectiveness of the tool.
WARNING:
Always remove the
plug from the power source while
changing accessories.
WASH VEHICLE OR BOAT
Before applying polish or wax, it is
important to clean and dry all the surfaces
to be polished or waxed.
1. Wash, clean and dry the vehicle or
boat.
2. Remove all road tar, grease spots and
bug stains with a general purpose
cleaner.
3. Make sure the work area is dry.
ATTACHING THE WAX APPLICATOR
BONNET TO THE FOAM PAD
WARNING:
Before changing
accessories, BE SURE that the switch is
in the OFF position and the plug is
removed from the power source.
1. Place wax applicator bonnet on foam
pad as shown in Fig. 1.
2. ALWAYS make sure that the elastic
strip on the bottom of the bonnet is
securely tucked on the under side of
the foam pad.
IMPORTANT: Read, understand and follow
all instructions and warnings on polishes
and waxes.
APPLYING PASTE WAX TO BONNET
IMPORTANT: Do not apply wax directly
to car!
Spread a heaping teaspoon of wax evenly
over the entire surface of applicator bonnet
using a putty knife or any other flat object
(see Fig. 2).
APPLYING LIQUID WAX TO BONNET
IMPORTANT: Do not apply wax directly
to car!
1. Apply three swirls of wax over
applicator bonnet (see Fig. 3).
2. This should be enough to cover ¼ of
the car surface. For the second and
third applications of wax to the bonnet,
only use about half as much as on the
first application. The bonnet will not
absorb as much wax on these
applications.
OPERATION
!
!
Fig. 1
Fig. 2