Simoniz 39-9027-4, Руководство пользователя

Страница: 12 / 16

12
APPLYING WAX TO SURFACE TO BE
POLISHED
– cont’d
3. Apply wax in a straight line with either
a side-to-side or back-and-forth
motion. ALWAYS use broad, even
strokes when applying wax (see
Fig. 6).
4. Start applying wax to the flat surfaces
(hood, trunk and roof) first. Wax one
section at a time (see Fig. 7).
5. After flat surfaces are covered with
wax, do the sides. Hold tool with the
cord hanging free (see Fig. 8).
6. It is easiest to apply the wax to the
entire surface before starting the
removal phase, however, follow the
specific recommendations of the wax
or polish being used.
7. Turn the buffer/polisher OFF when you
have finished applying wax with the
applicator bonnet.
8. Remove the wax applicator bonnet
and use it to apply polish by hand to all
the hard-to-reach surfaces (under
bumpers, around door handles, etc.)
(see Fig. 9).
9. Properly dispose of wax applicator
bonnet.
ATTACHING THE POLISHING BONNET
TO THE FOAM PAD
1. Place the terry cloth bonnet on foam
pad (see Fig. 10).
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Left Right
OPERATION