INSTALATION AND CONFIGURATION GUIDE
simon.es/simon100
37
Simon | 100
-
If you remove a failed device. In that case you will
also have the opportunity of replace this node
keeping the Z-Wave ID.
-
If you are trying to remove a battery device you are
able to use:
a) The “X” red icon where an exclusion process will
start.
b) The ”Trash can” yellow icon where HUB iO will set
it as failed and will remove it from network if battery
device does not responds.
-
If you remove a Simon iO device, HUB iO
If HUB iO is the Master Controller (SIS) the HUB iO will
remove all Simon iO devices and after that will proceed to
reset itself and will go to factory settings.
If HUB iO is a Primary Controller (PC) the HUB iO will
remove it from the Network and Simon 100 iO APP will
remove all its database.
If HUB iO is not the Master Controller (SIS) or a Primary Controller (PC) you will only be available to remove devices
that have been removed from HUB iO Network where device will be removed from Database and also the own HUB
iO where HUB iO will be removed from installation and Simon 100 iO APP will remove all its database.
