Simex SLE-73, Руководство пользователя

Страница: 23 / 32

User manual - COUNTER SLE-73
9.1. LIST OF REGISTERS
Register Write Range Register description
01h 1 No see descr. Display value - higher word.
02h 1 No see descr. Display value - lower word.
03h No see descr.
The status of the displayed value:
0000h - data valid,
0080h - overflow, warning “ -Hi- ” is displayed
0040h - underflow, warning “ -Lo- ” is displayed
04h 2 Yes see descr.
State of precounter - this is internal modulo N counter, where N =
“div” , overfill of this counter causes incrementation/decrementation of
main counter.
05h 2 Yes see descr. State of precounter (low word)
06h
2
Yes see descr. Main counter value - high word
07h 2 Yes see descr. Main counter value - low word.
11h Yes 0 ÷ 3
“Pr inP” option (programmable input operation mode):
0
- mode
“diSAbL”
, disabled
1 - mode “inhibi” , zeroing the counter,
2 - mode “inhibi” , holding of the counter,
3 - mode “dirEct” , counter direction
12h Yes 0 ÷ 3
“rESEt” option (main counter clearing mode):
0 - mode “ALL” ,
1 - mode “EL” , reset with programmable input and RS-485 interface
2 - mode “mAn” , reset with [RESET] button and RS-485 interface
3 - mode “nonE” , reset with RS-485 interface only
14h Yes 0 ÷ 9
“FiLtEr”
option (filtering rate):
0
- for input signal up to 3kHz frequency;
1
- up to 10Hz;
2
- up to 20Hz;
3
- up to 30Hz;
4
- up to 40Hz;
5
- up to 50Hz;
6
- up to 60Hz;
7
- up to 70Hz;
8
- up to 80Hz;
9
- up to 90Hz;
16h Yes see descr.
“muL” in “PrESCA” menu (main counter multiplier, high word);
counter always shows main counter value recalculated by prescaler
coefficients
17h Yes see descr.
“muL” in “PrESCA” menu (main counter multiplier, low word);
Cumulative value of registers 16h and 17h: from -99999 to 999999
18h Yes see descr.
“div” parameter in “PrESCA” menu (input divider, high word);
content of main counter is incremented by 1 every n pulses on input B,
where n is content of precounter registers
19h Yes see descr.
“div”
parameter in
“PrESCA”
menu (input divider, low word);
Cumulative value of registers 18h and 19h: from 1 to 999999
1Ah 6 Yes see descr. “oFFSEt” parameter in “PrESCA” menu (high word)
1Bh 6 Yes see descr.
“oFFSEt” parameter in “PrESCA” menu (low word)
Cumulative value of registers 1Ah and 1Bh: from -99999 to 999999
1Ch Yes 0÷5
“
Point
” parameter in “
Presca
” menu (decimal point position)
0 - “ 0 ”; 1 - “ 0.0 ”; 2 - “ 0.00 ”; 3 - “ 0.000 ”; 4 - “ 0.0000 ”; 5 - “ 0.00000 ”
20h
3
Yes 0 ÷ 199 Device address
23