Simex SIMPACT SPI-94, Руководство пользователя

Страница: 41 / 52

User manual for flow meter with pulse input SPI-94
Register Write Range Register description
35h Yes 0 ÷ 999
“t on” parameter in “rELAy1” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter
36h Yes 0 ÷ 999
“t oFF” parameter in “rELAy1” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter
37h Yes 0 ÷ 1
“unit” parameter in “rELAy1” menu:
0 - seconds; 1 - minutes
38h Yes 0 ÷ 2
“ALArmS” parameter in “rELAy1” menu:
0 - no changes; 1 - on; 2 - off
39h
3Ah
Yes
Yes
0 ÷ 999999 “ SEt P2 ” parameter in “ rELAy1 ” menu, no decimal point included
3Bh Yes 0 ÷ 1
“vALUE” parameter in “rELAy1” menu (kind of value controlled
relay): 0 - “FLo”; 1 - “tot”;
3Ch Yes 0 ÷ 3
“t PrEc” parameter in “rELAy1” menu (precision of thresholds and
hysteresis while relay is controlled due to total flow counter value):
0 - “ 0”; 1 - “ 0.0”; 2 - “ 0.00”; 3 - “0.000”
3Dh Yes 0 ÷ 1
“t unit” parameter in “rELAy1” menu (the unit of thresholds and
hysteresis while relay is controlled due to total flow counter value):
0 - lit.; 1 - m 3 ;
Parameters or relay R2 operation
40h
41h Yes
Yes
0 ÷ 999999 “
SEt P ” parameter in “ rELAy2 ” menu, no decimal point included
42h
43h Yes
Yes
0 ÷ 99999 “ HySt ” parameter in “ rELAy2 ” menu, no decimal point included
44h Tak 0 ÷ 5
“ modE ” parameter in “ rELAy2 ” menu:
0 - “ noACt ” mode; 1 - “ on ” mode; 2 - “ oFF ” mode; 3 - “ in ” mode;
4 - “ out ” mode; 5 - “ modbuS ” mode
45h Yes 0 ÷ 999
“t on” parameter in “rELAy2” menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter
46h Yes 0 ÷ 999
“t oFF”
parameter in
“rELAy2”
menu, expressed in tenth of seconds
or tenth of minutes depend on “unit” parameter
47h Yes 0 ÷ 1
“unit” parameter in “rELAy2” menu:
0 - seconds; 1 - minutes
48h Yes 0 ÷ 2
“ALArmS” parameter in “rELAy2” menu:
0 - no changes; 1 - on; 2 - off
49h
4Ah
Yes
Yes
0 ÷ 999999 “ SEt P2 ” parameter in “ rELAy2 ” menu, no decimal point included
4Bh Yes 0 ÷ 1
“vALUE” parameter in “rELAy2” menu (kind of value controlled
relay): 0 - “FLo”; 1 - “tot”;
4Ch Yes 0 ÷ 3
“t PrEc”
parameter in
“rELAy2”
menu (precision of thresholds and
hysteresis while relay is controlled due to total flow counter value):
0 - “ 0”; 1 - “ 0.0”; 2 - “ 0.00”; 3 - “0.000”
41