Simex SIMPACT SPI-94, Руководство пользователя

Страница: 43 / 52

User manual for flow meter with pulse input SPI-94
Register Write Range Register description
68h Yes 0 ÷ 2
“ALArmS” parameter in “rELAy4” menu:
0 - no changes; 1 - on; 2 - off
69h
6Ah
Yes
Yes
0 ÷ 999999 “ SEt P2 ” parameter in “ rELAy4 ” menu, no decimal point included
6Bh Yes 0 ÷ 1
“vALUE” parameter in “rELAy4” menu (kind of value controlled
relay): 0 - “FLo”; 1 - “tot”;
6Ch Yes 0 ÷ 3
“t PrEc” parameter in “rELAy4” menu (precision of thresholds and
hysteresis while relay is controlled due to total flow counter value):
0 - “ 0”; 1 - “ 0.0”; 2 - “ 0.00”; 3 - “0.000”
6Dh Yes 0 ÷ 1
“t unit” parameter in “rELAy4” menu (the unit of thresholds and
hysteresis while relay is controlled due to total flow counter value):
0 - lit.; 1 - m 3 ;
70h Yes 0 ÷ 1
“ modE ” parameter in “ HOLd ” menu (type of detected changes):
0 - peaks; 1 - drops
71h Yes 0 ÷ 9999
“ PEA ” parameter in “ HOLd ” menu (minimum detectable change, no
decimal point included)
72h Yes 1 ÷ 199
“ timE ” parameter in “ HOLd ” menu, maximum peaks' (or drops')
display time expressed in seconds
73h Yes 0 ÷ 1
“ HdiS ” parameter in “ HOLd ” menu (the type of values displayed on
the display ):
0
- current measurement value;
1
- peaks (or drops) values
74h Yes 0 ÷ 1
“ H r1 ” parameter in “ HOLd ” menu (the control mode of relay R1 and
LED R1) :
0 - control depends on current measurement values;
1 - control depends on peaks (or drops) values;
75h Yes 0 ÷ 1
“ H r2 ” parameter in “ HOLd ” menu (the control mode of relay R2 and
LED R2) :
0 - control depends on current measurement values;
1 - control depends on peaks (or drops) values;
76h Yes 0 ÷ 1
“ H r3 ” parameter in “ HOLd ” menu (the control mode of relay R3 and
LED R3) :
0 - control depends on current measurement values;
1 - control depends on peaks (or drops) values;
77h Yes 0 ÷ 1
“
H r4
” parameter in “
HOLd
” menu (the control mode of relay R4 and
LED R4) :
0 - control depends on current measurement values;
1 - control depends on peaks (or drops) values;
78h Yes 0 ÷ 1
“ HOUt ” parameter in “ HOLd ” menu ( the control mode of current
output):
0 - control depends on current measurement values;
1 - control depends on peaks (or drops) values;
43